Skip to main content

Biodegradation of penicillin G from industrial bacteria residue by immobilized cells of Paracoccus sp. KDSPL-02 through continuous expanded bed adsorption bioreactor

Abstract

Background

An efficient biodegradation-strengthening approach was developed to improve penicillin G degradation from industrial bacterial residue in an expanded bed adsorption bioreactor (EBAB) is reported in this paper.

Results

Paracoccus sp. strain KDSPL-02 was isolated based on its ability to use penicillin G as the sole carbon and nitrogen source. Strain identification was based on analyses of morphology, physio-biochemical characteristics, and 16S rDNA sequences. The effects of temperature, pH, PVA-sodium alginate concentration, calcium chloride concentration and initial penicillin G concentration were investigated. Repeated operations of immobilized cells with EBAB, At initial penicillin concentrations below 2.0ā€‰gā€‰Lāˆ’ā€‰1, the continuous mode could reach more than 20 times, and the degradation rate reached 100%.

Conclusions

The present study suggests that the EBAB system can be utilized for the simple and economical biodegradation of penicillin G from industrial bacterial residue.

Introduction

In recent years, biomass resources, as a kind of renewable energy, have brought benefited to mankind. Among them, industrial bacterial residue from pharmaceutical industries has recently become widely used in some countries as fodder, which is rich in proteins and carbohydrates and used in animal husbandry [8]. However, new problems have arisen in the process of utilization. For instance, the typical antibiotic penicillin G from penicillin fermentation fungi residue (PFFR) may accumulate in the natural environments, in places such as soil, sediments, surface water, and groundwater, and may ultimately enter the food chain and the bodies of humans and animals; approximately 30ā€“90% of unchanged penicillin G is excreted into waste systems [27]. Interestingly, at the trace residue concentrations in the sludge environment, antibiotics and their metabolites could also exhibit potential toxicity to humans and aquatic organisms and could be responsible for the emergence of antibiotic-resistant bacteria and genes. Thus, to reduce the risk of exposure, tools for effective degradation of penicillin residues in the environment are necessary [24].

PFFR is regarded as a hazardous solid waste that is disposed via approved methods, such ad landfills, incineration, anaerobic treatment, or composting. However, the waste mycelium contains large amounts of proteins, carbohydrates, and cellulose. Present strategies for the disposal of such wastes are costly and wasteful and cause serious secondary pollution [28]. Thorough studies have reported that microbes improve degradation in terrestrial and aquatic environments [12, 13]; however, the drawbacks of biodegradation include the formation of intermediates and incomplete mineralization. Several tentative suggestions have been proposed to solve this problem as follows. One solution involving heterogeneous photocatalysis is the coupling of advanced oxidation processes (AOPs) and biodegradation [1, 2, 15, 16]. Nevertheless, this is costly due to the multistep separation and is not easy to scale-up.

On the other hand, from an engineering standpoint, attempts were made in this study to treat real PFFR using biodegradation treatment followed by expanded bed adsorption bioreactor (EBAB). To the best of our knowledge this is the first reported study in which the EBAB system is being used in connection with the biodegradation process to treat real PFFR. An expanded bed adsorption bioreactor (EBAB) is products from in-situ separation processes of antibiotic degraded byproducts. Within this process, cell immobilization is a crucial step in degradation because of advantages such as improved tolerance to a variety of toxic and recalcitrant compounds in a suitable matrix [4, 18, 23, 25, 29], Immobilized bacterial cells are easy to separate and reuse and have higher volumetric reaction rates or higher local cell concentrations [3]. Therefore, immobilization could be the key in the biodegradation of industrial bacteria residues [5].

In the specific process of cell immobilization, cross-linked Ca-alginate is one of the most commonly used immobilization polymers due to its highly porous structure that facilitates the diffusion of solutes and dissolved gases [19]. However, alginate also has some problems in cell immobilization, such as low mechanical strength and restricted pH value application range. For these reasons, it is essential that research should focus on the investigation of an appropriate immobilized matrix that can be integrated into the cell immobilization process.

In the present study, we developed an economical and efficient strategy for penicillin G biodegradation. Paracoccus sp. strain KDSPL-02 was isolated from sludge contaminated by antibiotics based on its ability to use penicillin G as the sole carbon and nitrogen source. Strain identification was based on analyses of morphology, physio-biochemical characteristics, and 16S rDNA sequences. A polyvinyl alcohol (PVA)-alginate mixed matrix was used in the immobilization process for biodegradation. This study focused on determining the optimal immobilization conditions by single-factor tests. An expanded bed adsorption bioreactor (EBAB) was employed to degrade penicillin G residue. Repeated biodegradation properties in terms of the degradation rate and degradation time were also discussed.

Materials and methods

Chemicals

Sludge samples were collected from the district of Shijiazhuang, China. Penicillin G and PFFR were provided by North China Pharmaceutical Group Corporation, China. All other chemicals used in this study were of analytical grade and commercially available without further purification unless otherwise noted.

Isolation and enrichment of penicillin G-degrading bacteria

The base mineral media (BMM) consisted of 1.60ā€‰g of K2HPO4, 0.40ā€‰g of KH2PO4, 0.20ā€‰g of MgSO4Ā·7H2O, 0.03ā€‰g of CaCl2Ā·2H20, 0.02ā€‰g of FeCl3Ā·6H20, 0.50ā€‰g of NH4NO3, and 0.50ā€‰g of yeast extract per litre of water. The growth medium (GM) consisted of 2.40ā€‰g of yeast extract per litre of water. The final pH was adjusted to 7.0.

The bacterial strain was isolated from the collected sludge sample. Exactly 10ā€‰g (wet weight) of the sludge sample was added into 100ā€‰mL sterile BMM flasks, and 0.2ā€‰gā€‰Lāˆ’ā€‰1 penicillin G was added as the inducer. The inoculated flasks were placed on an environmental orbital shaker at 120ā€‰rpm at 30ā€‰Ā°C for 24ā€‰h. Then, 10ā€‰mL of the enrichment culture media mentioned above was transferred to 100ā€‰mL of fresh GM and cultivated under the same conditions. Afterwards, the enrichment suspension was streaked on nutrient agar plates and then incubated at 30ā€‰Ā°C for 72ā€‰h. Colonies with a distinct morphological type were collected and transferred to standard agar medium until a pure strain was isolated. KDSPL-02 utilized penicillin G as the sole carbon and energy source for growth in BMM and thus was selected for further studies.

Bacterial strain identification

KDSPL-02 was identified based on analyses of morphology, physio-biochemical characteristics, and 16S rDNA gene sequence. Physiological and biochemical identification of the strain was examined with reference to Bergeyā€™s Manual of Determinative Bacteriology. Genomic DNA was prepared using standard procedures. Subsequently, 16S rDNA gene amplification, purification, and screening were performed as previously described [6]. The resulting sequence was compared with the GenBank nucleotide library via a BLAST search through the National Center for Biotechnology Information. Multiple alignments of 16S rDNA were carried out using CLUSTALX 1.8.1, and phylogeny was analyzed using MEGA4.0 [22]. A phylogenetic tree based on the 16S rRNA sequences was constructed using the neighbour-joining method after the alignment of related sequences from the GenBank database.

Fermentation of free whole cell KDSPL-02

The inoculum was prepared by transferring a full loop of mycelia from a 2-day old suspension. The culture was incubated on a rotary shaker at 30ā€‰Ā°C and 150ā€‰rpm for 48ā€‰h. For inoculation, 10% (v/v) spore suspension was transferred to 1ā€‰L Erlenmeyer flasks containing 200ā€‰mL of fresh fermentation medium and cultivated on an environmental orbital shaker at 120ā€‰rpm at 30ā€‰Ā°C. After 48ā€‰h of incubation, the culture broth was centrifuged at 5000ā€‰rpm at 4ā€‰Ā°C using a refrigerated centrifuge for further immobilization. The fermentation medium (FM) was composed of the following: 10ā€‰mL of industrial liquid sugar; 2.40ā€‰g of yeast extract, 1.60ā€‰g of K2HPO4, 0.40ā€‰g of KH2PO4, 0.20ā€‰g of MgSO4Ā·7H2O, 0.03ā€‰g of CaCl2Ā·2H20, 0.02ā€‰g of FeCl3Ā·6H20, 0.50ā€‰g of NH4NO3 per litre of water.

Immobilization of Paracoccus sp. KDSPL-02 cells

First, 2% sodium alginate in 100ā€‰ml of warm sterile distilled water (50ā€‰Ā°C) was added to form a slurry completely, and the slurry was cooled to 30ā€‰Ā°C. Second, 10ā€‰ml of cell suspension (OD600ā€‰=ā€‰1.2, wet weight 2.5ā€‰g) was placed in a sterile beaker, full of sodium alginate and PVA matrix slurry and subjected to a constant mild stirring. Third, the cell-alginate mixture was extruded dropwise through a needle (ID 2.0ā€‰mm) into 0.2ā€‰M CaCl2 solution containing sterile saturated boric acid solution by a peristaltic pump. Droplets were instantly transformed into spherical beads (2ā€“3ā€‰mm in diameter). Finally, the beads were washed three times with sterile distilled water and stored in a refrigerator until further use.

Optimal conditions of immobilization of Paracoccus sp. KDSPL-02 cells

For determining the optimal conditions for the immobilization of KDSPL-02 cells, a single-factor test was designed under different conditions of alternate temperature (15ā€‰Ā°Cā€“45ā€‰Ā°C), pH (4.0ā€“11.0), support materials and cross-linking solution concentration, initial tolerance concentration of penicillin G (1.2 and 1.6ā€‰gā€‰Lā€‰āˆ’ā€‰1). KDSPL-02 was incubated in GM at 120ā€‰rpm and 30ā€‰Ā°C on an orbital shaker. Each treatment was set in triplicate with free cell samples as control.

EBAB construction and penicillin G degradation process

The EBA-based bioreactor was mainly an external recovery loop composed primarily of a roll membrane filtration (relative molecular mass 200; purchased from Jinhua Co., Shanghai, China) (Fig.Ā 1, detail 1) and three parallel EBA columns (25ā€‰mm o.d., length 500ā€‰mm, total volume 200ā€‰mL; purchased from Jinhua Co., Shanghai, China) (Fig. 1, detail 2, 3 and 4). The external recovery loop was established by connecting the EBA columns to the storage vat (Fig. 1, detail 5 and 6) with Teflon tubing (4.5ā€‰mm o.d., 3.0ā€‰mm i.d.; Hamilton, Bonaduz, Switzerland). Pharmed BPT tube (2.5ā€‰mm o.d., 2.4ā€‰mm i.d.; Cole-Parmer, USA) was used to integrate the peristaltic pump (Cole-Parmer, USA) (Fig. 1, detail 7 and 8) into the loop. To retain the immobilized particles within the column while allowing the passage of the cells, both ends were equipped with a wire mesh (stainless steel; diameter 20ā€‰mm, 250ā€‰Ī¼m mesh width) fixed with a Teflon ring. The openings of the column connectors had an inner diameter of 4ā€‰mm.

Fig. 1
figure 1

Schematic dragram of the EBAB system used in penicillin G biodegradation

Repeated degradation was performed in the EBAB system on the basis of the optimal immobilization approach. The operation consisted of three steps. First, valves 9, 10 and 11 were opened and the immobilized cells were precultured in an expanded bed column with fresh medium. Second, valve 9, 10 and 11 were closed, pump 8 was started, and values 12 and 13 were opened. The PFFR suspension was circulated through the EBA column for biocatalytic degradation in the expanded bed. For operation of the expanded bed, the PFFR suspension flowed through the bedpost at a rate of 4ā€‰Lā€‰hāˆ’ā€‰1. When the catalytic activity of the immobilized particle decreased, columns were alternated and switched on to their corresponding spigots were switched on to repeatedly operate the circulation system. The PFFR suspension through the cylinder circulated back to storage vat 14. When the residual antibiotic concentration in PFFR fell below the nonhazardous concentration, the third step was started, valves 10, 12 and 14 were opened, valve 13 was closed and pump 8 was started. The nonhazardous PFFR suspension was filtered through membrane filtration, the filtrate was recycled, and the concentrated nonhazardous PFFR suspension entered storage vat 14.

Through this process, the immobilized cells were activated by a moderate amount of fresh FM, and then the industrial bacterial residue was dissolved in water containing penicillin G and passed through membrane filtration. The clear liquid was circulated through the EBA column with immobilized cells, and penicillin G was degraded in the expanded bed column by the continuous mode at specific time intervals. The expanded bed was operated such that the liquid flowed at a rate of 150ā€‰mL/h. The columns were alternated and switched to their corresponding valves to repeatedly operate the circulation system after biocatalytic degradation.

Analytical methods

Concentration of penicillin G was determined by using high performance liquid chromatography (HPLC) system, with an Ultimate XB C18 column (4.6ā€‰Ć—ā€‰250ā€‰mm, 5ā€‰Ī¼m). The detailed chromatography conditions were carried out as following. The samples were measured with a flow rate of 1.0ā€‰mL/min; Column temperature: 30ā€‰Ā°C, mobile phase: methanol/phosphate (0.1ā€‰M potassium dihydrogen phosphate, pH, flow rate: 1.0ā€‰mL/min, injection volume: 20ā€‰Ī¼L; detection wavelength: 225ā€‰nm.

Penicillin G degradation conditions

Degradation by free cells

A 0.2ā€‰mL suspension of whole cell KDSPL-02 with a degradation activity of 2ā€“7.0ā€‰U was added to a 250ā€‰mL conical flask containing a 100ā€‰mL solution of 0.8ā€“1.6ā€‰gā€‰Lāˆ’ā€‰1 penicillin G. The activity (U) of penicillin G degraded by KDSPL-02 free cells were defined as: g gāˆ’ā€‰1ā€‰hāˆ’ā€‰1, the wet cell of one gram degraded penicillin (g) at 1 h.

Degradation by immobilized cells

Polymer beads (without cells) inoculated to the sterile distilled water served as control to investigate the removal of Penicillin G by adsorption to the immobilized beads. The activity (U) of penicillin G degraded by KDSPL-02 immobilized cells was defined as: g gāˆ’ā€‰1ā€‰hāˆ’ā€‰1, the immobilized wet cell of one gram degraded penicillin (g) at 1 hour.

Results and discussion

Isolation and characterization of penicillin G-degrading strains

Using penicillin G as the sole carbon source, bacteria that can degrade penicillin G were successfully enriched. After 2 weeks of acclimatization, six single colonies with different morphological types were isolated and identified as KDSPL-01ā€“KDSPL-06. A pilot study showed that KDSPL-02, without any treatment, exhibited the highest penicillin G degradation ability. Therefore, it was chosen as the target strain. The purity of KDSPL-02 was determined by the morphological uniformity of cells from a single colony on solid medium plates via microscopic observation.

The morphology of KDSPL-02 cells was observed under a microscope. The colonies of KDSPL-02 appeared circular and light yellow with regular margins during growth on GM plates for 48ā€‰h. KDSPL-02 cells were spherical and free of flagella. Colonies were round, pale-yellow, and glossy with a diameter of 0.5ā€“0.9ā€‰Ī¼m on agar plates. Based on physiological and biochemical tests, the strain was positive in physiological and biochemical tests for adonitol, L-arabinol, ELLMAN reagents, tyrosine aramidase, and the utilization of D-tagatose. The strain was negative for Gram staining, alanine phenylalanine, D-cellobiose, glutamine synthase, Ī²-glucosidase, and the utilization of D-glucose and Ī²-alanine aminolase (detailed physiological and biochemical characteristics are presented in TableĀ 1).

Table 1 Morphological and biochemical characteristics of KDSPL-02

The 16S rDNA gene from KDSPL-02 was PCR amplified, and a single fragment of 1315ā€‰bp, was obtained and completely sequenced. According to BLAST analysis, the resulting sequence had high similarity to the 16S rDNA gene sequence of bacteria belonging to the Paracoccus group and closely clustered with strain DSM582T (GenBank accession no. JRKO 01000001) and strain JJJ (GenBank accession no. AJ 864469), with sequence identities of 99.92 and 99.92%, respectively. A phylogenetic tree was constructed based on the 16S rDNA gene sequence of KDSPL-02 and related strains using MEGA 4.0 (Fig.Ā 2). In consideration of the morphological, physio-biochemical, and 16S rDNA gene analyses, KDSPL-02 was tentatively identified as Paracoccus sp.

Fig. 2
figure 2

Phylogenetic analysis of the strain KDSPL-02 related species by the neighbour-joining approach. The scale bars represent 0.005 substitutions per site

Bacteria such as Pseudomonas and Escherichia coli are metabolically active microorganisms capable of degrading many antibiotics isolated from various soils or sediments [9, 11]. Meanwhile, Paracoccus sp. is a new bacterial genus that may participate in the efficient degradation of penicillin G. To the best of our knowledge, there is no information concerning the ability of Paracoccus sp. to degrade penicillin G. Furthermore, the potential enzymes such as beta-lactamases and penicillin acylases were predicted by searching NCBI database and There are 892 beta-lactamase and 156 penicillin acylases from Paracoccus sp. when searching from NCBI database. Several beta-lactamases and penicillin acylases from Paracoccus sp. were listed in Table S1 and Table S2, respectively.

Optimization of immobilized of KDSPL-02 cells

Effect of temperature on immobilized KDSPL-02 cells

The effect of temperature on the degradation activity of free and immobilized Paracoccus sp. KDSPL-02 cells was investigated at various temperatures (15ā€‰Ā°Cā€“45ā€‰Ā°C) (Fig.Ā 3). The optimum temperatures studied for the degradation activity by Paracoccus sp. KDSPL-02 were determined. The results showed that free and immobilized cells exhibited optimum degradation activity at different temperatures. The optimum temperature of the free cells was 30ā€‰Ā°C, while the optimum temperature of the immobilized cells ranged from 30ā€‰Ā°Cā€“35ā€‰Ā°C, which implied that immobilized cells could function in a broader temperature environment. According to the above result, the experimental temperature was 30ā€‰Ā°C in the following test.

Fig. 3
figure 3

The influence of temperature on the degradation activity of free and immobized KDSPL-02 cell. (black square refers free cells, red circle refers immobilized cells)

Effect of pH on immobilized KDSPL-02 cells

The pH of the medium is an important factor that can affect cell growth since it influences the metabolic pathways, the activity of degradation and the dominating species in a mixed culture [10]. Variations in the pH of the fermentation medium can affect the penicillin G-degrading microbial population in a mixed microflora and even the cellular structure and morphology of the microbes [21]. However, due to support materials also enhancing the stability of the immobilized cell, the immobilization process successfully in improved the cell pH tolerance. We compared the stability and tolerance of free and immobilized cells at various pH values. The analysis carried out in this study demonstrates substantial differences in the pH optima of free and immobilized cells. The data clearly depicted that free cells can normally grow from pHā€‰6 to 10, and the optimum pH was 7 to 8; the cells started losing its activity at pHā€‰8, but immobilization of cells in alginate beads expanded the range of normal growth from pHā€‰5 to 10, and activity was retained up to pHā€‰9 (Fig.Ā 4). The shifting of the pH towards an alkaline value upon immobilization may be due to secondary interactions between the enzyme and the polymer matrix. In addition, the polar groups of alginate may have interacted with the functional groups of the cells, which changed the pH characteristics of the enzyme. These cases also appear in the other support materials.

Fig. 4
figure 4

Effect of pH on the degradation ability of the immobilized KDSPL-02. (black triangle refers free cells, red circle refers immobilized cells)

Effect of support materials and cross-linking solution concentration on immobilized KDSPL-02 cell cells

To developing stable beads to impart better entrapment efficiency of cells, removal ability of the immobilized KDSPL-02 cells and improved penicillin G tolerance of cells, different concentrations of support materials and cross-linking solution were evaluated. The degradation activity decreased when the sodium alginate concentration was below 3%(w/v) due to the large pore size causing leakage of cells. The immobilized beads were transparent and soft (Fig.Ā 5a). The degradation activity decreased at concentrations higher than 4% (w/v) as the pore size decreased, resulting in hindrance of substrate penetration into beads, and immobilized balls were opaque, hard and trailing. As reported previously, at sodium alginate concentration of 4%, immobilized beads that cause steric hindrance that intensified the interaction between the active site of the cell and alginate were produced, thus possibly causing higher levels of binding between the cell and sodium alginate, which resulted in poor degradation [26]. We finally chose a concentration of 3%(w/v), and proceeded with this concentration in further experiments. An observation of the PVA-alginate blended matrix was made (Fig.Ā 5b). The concentration of the cross-linking solution was directly related to the bead intensity and stability. When the concentration of cross-linking solution was low, the immobilized beads were soft and easily broken; when the cross-linking solution concentration was higher, the microbial cell activity was reduced due to the high osmotic pressure of salt, which caused cell dehydration and reduction in microbial activity. The results showed that 2% of calcium chloride concentration solution performed well for cross linkage (Fig.Ā 5c). Recently, various support materials have been used for cell immobilization such as metal organic framework [14], zeolite [7], iron oxide nanoparticles [17, 20] and so on. In our further studies, more support materials and cross-linking solution will be studied for enhancing the biodegradation efficiency.

Fig. 5
figure 5

Effect of support materials and cross-linking solution concentration on the formation of immobilized beads. a Effect of PVA concentration on the formation of immobilized beads (black square refers 2.0% PVA, red circle refers 2.5% PVA, blue up triangle refers 3.0% PVA, green down triangle refers 3.5% PVA, pink left triangle refers 4.0% PVA); b Effect of calcium chloride concentration on the formation of immobilized beads (black square refers 1.8% calcium chloride, red circle refers 2.0% calcium chloride, blue triangle refers 2.2% calcium chloride); c Effect of sodium alginate concentration on the formation of immobilized beads (black square refers 2.0% sodium alginate, red circle refers 2.5% sodium alginate, blue up triangle refers 3.0% sodium alginate, green down triangle refers 3.5% sodium alginate, pink left triangle refers 4.0% sodium alginate)

Effect of the initial concentration of penicillin G on immobilized KDSPL-02 cells

To determine the tolerance limits of free and immobilized cells, different concentrations (1.2ā€‰gā€‰Lāˆ’ā€‰1 and 1.6ā€‰gā€‰Lāˆ’ā€‰1) of penicillin G were applied (Fig.Ā 6). The experimental results showed that when the initial concentration of penicillin was 1.2ā€‰gā€‰Lāˆ’ā€‰1, free and immobilized KDSPL-02 cells could degrade penicillin in 5ā€‰h only the degradation activity of immobilized cells was higher than that of free cells. However, when the initial concentration of penicillin was 1.6ā€‰gā€‰Lāˆ’ā€‰1, not only was the degradation activity of immobilized cells was higher than that of free cells, but also the degradation activity of immobilized cells was higher than that of free cells. After 5ā€‰h of degradation, the degradation process of free cells tended to stop. As expected, immobilized cells contributed to gaining the properties of support materials. The support materials not only contributed to the stability and mechanical strength of the beads but also contributed to the improvement of degradation efficiency and tolerance limits.

Fig. 6
figure 6

Degradation of free and immobilized cells with different initial concentrations of Penicillin G. (black square refers 1.6ā€‰g/L immobilized cells, red circle refers 1.6ā€‰g/L free cells, blue up triangle refers 1.2ā€‰g/L immobilized cells, green down triangle refers 1.2ā€‰g/L free cells)

The application of the biodegradation has been hampered due to low stability at higher temperature and extreme pH conditions, difficulty in recovery and reusability. After immobilization, the operational stability (such as thermal, pH stability, chemical stability as well as their storage stability) of enzymes profoundly increases which helps to extend their applications.

Continuous degradation of penicillin G with the EBAB system

Based on the above results, we employed the optimal strategy foe immobilization of KDSPL-02 cells for repeated penicillin G biodegradation by the EBAB system. The continuous degradation studies were carried out in a batch bioreactor containing 2.0ā€‰kg of beads (100ā€‰g of beads immobilized wet weight of 2.0ā€‰g, OD 600Ā =ā€‰3.0 cell suspension). The kinetic profile of the repeated batch degradation is shown in Fig.Ā 7. In the first batch, a 3ā€‰h lag phase was observed, and then the penicillin G concentration decreased rapidly. After 12ā€‰h of degradation, penicillin G was completely degraded. Repeated batch cultures were performed using the method described in Section 2.7. The lag phase was eliminated in batch 2 because the cells from batch 1 were reused to inoculate the next batch. Penicillin G was removed immediately, and the degradation time shortened from 12ā€‰h (batch 1) to 8ā€‰h (batch 2). No lag phase was observed in batch 3. The fermentation time was only 5ā€‰h. The degradation efficiency was maintained constant in the following repeated culture cycles of batches 4 and 5. As described in TableĀ 2, the fermentation time significantly shortened from 12ā€‰h (for batch 1) to 5ā€‰h (for batch 5).

Fig. 7
figure 7

Repeated batch Penicillin G biodegradation in EBAB system. Biodegradation conditions: 30ā€‰Ā°C, pHā€‰7.0, 3.0% sodium alginate, 3.0% PVA and 2.0% calcium chloride. Initial Penicillin G concentration was 1.2ā€‰gā€‰Lāˆ’1

Table 2 Repeated operations of free and immobilized cells on penicillin G biodegradation

To prevent the loss of degrading bacteria, we recycled the bacterial suspension in the EBAB. After filtering with an ultrafiltration membrane, we tested the degradation activity of crude liquid and clear liquid (Fig.Ā 8) and found that the clear liquid had no degradation activity for penicillin, which proves that we can effectively prevent the loss of degrading bacteria, and further implies that this EBAB-based biocatalytic process could avoid a series of biological safety problems caused by the loss of antibiotic degradation plasmids.

Fig. 8
figure 8

Penicillin G degradation activity of clear liquid and crude liquid in expanded bed reactor. (black square refers clear liquid, red circle refers crude liquid)

Repeated operations of immobilized cells

One of the most important advantages of immobilized cell systems is the extended and repeated use of the biocatalyst for sequential batches. Experiments conducted for repeated operations of immobilized cells with EBAB are shown in Table 2. The experimental results showed that when the initial concentration of penicillin was below 2.0ā€‰gā€‰Lāˆ’ā€‰1, the process could be repeated more than 20 times, and the degradation rate reached 100%. When the initial concentration of penicillin was above 2.0ā€‰gā€‰Lāˆ’ā€‰1, the degradation rate decreased and the batch degradation time was correspondingly prolonged. In addition, using free-cell mode, the number of repeated operations decreased and the degradation time was prolonged under the same initial penicillin concentration.

Conclusions

In summary, the novel bacterial strain Paracoccus sp. KDSPL-02 was isolated and identified. This strain was identified based on analyses of morphology, physio-biochemical characteristics, and 16S rDNA gene sequences. Further, Paracoccus sp. KDSPL-02 cells entrapped in sodium alginate beads, PVA-alginate beads showed more tolerance to penicillin G. These entrapped cells have effectively removed penicillin G from the industrial bacterial residues. These biocatalysts were used both in semi continuous and continuous mode to remove penicillin G from effluents collected from pharmaceutical industries. When the initial concentration of penicillin was below 2.0ā€‰gā€‰Lāˆ’ā€‰1, the process could be repeated more than 20 times, and the degradation rate reached 100%. The present study clearly demonstrates the development of an industrially feasible and economically viable bioremediation strategy for discharging penicillin G-free effluents into the environment.

Availability of data and materials

The datasets used and/or analysed during the current study are available from the corresponding author on reasonable request.

Abbreviations

BLAST:

Basic Local Alignment Search Tool

EBAB:

Expanded bed adsorption bioreactor

PFFR:

Penicillin fermentation fungi residue

References

  1. Akmehmet Balcıoğlu I, Ɩtker M. Treatment of pharmaceutical wastewater containing antibiotics by O3 and O3/H2O2 processes. Chemosphere. 2003;50(1):85ā€“95.

    ArticleĀ  Google ScholarĀ 

  2. Arslan-Alaton I, Dogruel S. Pre-treatment of penicillin formulation effluent by advanced oxidation processes. J Hazard Mater. 2004;112(1ā€“2):105ā€“13.

    ArticleĀ  Google ScholarĀ 

  3. Bergero MF, Lucchesi GI. Immobilization of Pseudomonas putida a (ATCC 12633) cells: a promising tool for effective degradation of quaternary ammonium compounds in industrial effluents. Int Biodeterior Biodegradation. 2015;100:38ā€“43.

    ArticleĀ  Google ScholarĀ 

  4. Chen D, Chen J, Zhong W, Cheng Z. Degradation of methyl tert-butyl ether by gel immobilized Methylibium petroleiphilum PM1. Bioresour Technol. 2008;99(11):4702ā€“8.

    ArticleĀ  Google ScholarĀ 

  5. Chen K-C, Chen C-Y, Peng J-W, Houng J-Y. Real-time control of an immobilized-cell reactor for wastewater treatment using ORP. Water Res. 2002;36(1):230ā€“8.

    ArticleĀ  Google ScholarĀ 

  6. Chen S, Hu M, Liu J, Zhong G, Yang L, Rizwan-ul-Haq M, Han H. Biodegradation of beta-cypermethrin and 3-phenoxybenzoic acid by a novel Ochrobactrum lupini DG-S-01. J Hazard Mater. 2011;187(1ā€“3):433ā€“40.

    ArticleĀ  Google ScholarĀ 

  7. Emami Moghaddam SA, Harun R, Mokhtar MN, Zakaria R. Potential of zeolite and algae in biomass immobilization. Biomed Res Int. 2018;2018:6563196.

    ArticleĀ  Google ScholarĀ 

  8. Fent K, Weston AA, Caminada D. Ecotoxicology of human pharmaceuticals. Aquat Toxicol. 2006;76(2):122ā€“59.

    ArticleĀ  Google ScholarĀ 

  9. Hu J, Shi J, Chang H, Li D, Yang M, Kamagata Y. Phenotyping and genotyping of antibiotic-resistant Escherichia coli isolated from a natural river basin. Environ Sci Technol. 2008;42(9):3415ā€“20.

    ArticleĀ  Google ScholarĀ 

  10. Kumar G, Mudhoo A, Sivagurunathan P, Nagarajan D, Ghimire A, Lay CH, Lin CY, Lee DJ, Chang JS. Recent insights into the cell immobilization technology applied for dark fermentative hydrogen production. Bioresour Technol. 2016;219:725ā€“37.

    ArticleĀ  Google ScholarĀ 

  11. Li XZ, Plesiat P, Nikaido H. The challenge of efflux-mediated antibiotic resistance in gram-negative bacteria. Clin Microbiol Rev. 2015;28(2):337ā€“418.

    ArticleĀ  Google ScholarĀ 

  12. Migliore L, Fiori M, Spadoni A, Galli E. Biodegradation of oxytetracycline by Pleurotus ostreatus mycelium: a mycoremediation technique. J Hazard Mater. 2012;215-216:227ā€“32.

    ArticleĀ  Google ScholarĀ 

  13. Mullai P, Vishali S. Biodegradation of penicillin-G wastewater using Phanerochate chrysosporium ā€“ an equilibrium and kinetic modeling. Afr J Biotechnol. 2007;6(12):5.

    Google ScholarĀ 

  14. Nadar SS, Vaidya L, Rathod VK. Enzyme embedded metal organic framework (enzyme-MOF): De novo approaches for immobilization. Int J Biol Macromol. 2020;149:861ā€“76.

    ArticleĀ  Google ScholarĀ 

  15. Oller I, Malato S, SĆ”nchez-PĆ©rez JA, Maldonado MI, GassĆ³ R. Detoxification of wastewater containing five common pesticides by solar AOPsā€“biological coupled system. Catal Today. 2007;129(1ā€“2):69ā€“78.

    ArticleĀ  Google ScholarĀ 

  16. Oller I, Malato S, Sanchez-Perez JA. Combination of advanced oxidation processes and biological treatments for wastewater decontamination--a review. Sci Total Environ. 2011;409(20):4141ā€“66.

    ArticleĀ  Google ScholarĀ 

  17. Ranmadugala D, Ebrahiminezhad A, Manley-Harris M, Ghasemi Y, Berenjian A. Magnetic immobilization of bacteria using iron oxide nanoparticles. Biotechnol Lett. 2018;40(2):237ā€“48.

    ArticleĀ  Google ScholarĀ 

  18. Sarma SJ, Pakshirajan K. Surfactant aided biodegradation of pyrene using immobilized cells of Mycobacterium frederiksbergense. Int Biodeterior Biodegradation. 2011;65(1):73ā€“7.

    ArticleĀ  Google ScholarĀ 

  19. Sergio AM, Bustos TY. Biodegradation of wastewater pollutants by activated sludge encapsulated inside calcium-alginate beads in a tubular packed bed reactor. Biodegradation. 2009;20(5):709ā€“15.

    ArticleĀ  Google ScholarĀ 

  20. Sharifi M, Sohrabi MJ, Hosseinali SH, Hasan A, Kani PH, Talaei AJ, Karim AY, Nanakali NMQ, Salihi A, Aziz FM, Yan B, Khan RH, Saboury AA, Falahati M. Enzyme immobilization onto the nanomaterials: application in enzyme stability and prodrug-activated cancer therapy. Int J Biol Macromol. 2020;143:665ā€“76.

    ArticleĀ  Google ScholarĀ 

  21. Sivagurunathan P, Kumar G, Bakonyi P, Kim S-H, Kobayashi T, Xu KQ, Lakner G, TĆ³th G, NemestĆ³thy N, BĆ©lafi-BakĆ³ K. A critical review on issues and overcoming strategies for the enhancement of dark fermentative hydrogen production in continuous systems. Int J Hydrog Energy. 2016;41(6):3820ā€“36.

    ArticleĀ  Google ScholarĀ 

  22. Tamura K, Dudley J, Nei M, Kumar S. MEGA4: molecular evolutionary genetics analysis (MEGA) software version 4.0. Mol Biol Evol. 2007;24(8):1596ā€“9.

    ArticleĀ  Google ScholarĀ 

  23. Tepe O, Dursun AY. Combined effects of external mass transfer and biodegradation rates on removal of phenol by immobilized Ralstonia eutropha in a packed bed reactor. J Hazard Mater. 2008;151(1):9ā€“16.

    ArticleĀ  Google ScholarĀ 

  24. Wang P, Liu H, Fu H, Cheng X, Wang B, Cheng Q, Zhang J, Zou P. Characterization and mechanism analysis of penicillin G biodegradation with Klebsiella pneumoniae Z1 isolated from waste penicillin bacterial residue. J Ind Eng Chem. 2015;27:50ā€“8.

    ArticleĀ  Google ScholarĀ 

  25. Wang S-J, Loh K-C. Modeling the role of metabolic intermediates in kinetics of phenol biodegradation. Enzym Microb Technol. 1999;25(3ā€“5):177ā€“84.

    ArticleĀ  Google ScholarĀ 

  26. Wu J, Wang JL, Li MH, Lin JP, Wei DZ. Optimization of immobilization for selective oxidation of benzyl alcohol by Gluconobacter oxydans using response surface methodology. Bioresour Technol. 2010;101(23):8936ā€“41.

    ArticleĀ  Google ScholarĀ 

  27. Wu X, Xiong J, Huang Z, Cao S, Zong M, Lou W. Improving biocatalysis of cefaclor with penicillin acylase immobilized on magnetic nanocrystalline cellulose in deep eutectic solvent based co-solvent. Bioresour Technol. 2019;288:121548.

    ArticleĀ  Google ScholarĀ 

  28. Xia S, Jia R, Feng F, Xie K, Li H, Jing D, Xu X. Effect of solids retention time on antibiotics removal performance and microbial communities in an a/O-MBR process. Bioresour Technol. 2012;106:36ā€“43.

    ArticleĀ  Google ScholarĀ 

  29. Zhao G, Zhou L, Li Y, Liu X, Ren X, Liu X. Enhancement of phenol degradation using immobilized microorganisms and organic modified montmorillonite in a two-phase partitioning bioreactor. J Hazard Mater. 2009;169(1ā€“3):402ā€“10.

    ArticleĀ  Google ScholarĀ 

Download references

Acknowledgements

Thanks to associated researcher Ziqiang Wang from Institute of Process Engineering, Chinese Academy of Sciences for guidance with the technology for industrial immobilization of bacterial cells.

Funding

This work was financially supported by National Natural Science Foundation of China (21978068, 21978067), Hebei Province Science and Technology Support Plan (16273812) and Hebei Province Department of Education Fund (BJ2017059).

Author information

Authors and Affiliations

Authors

Contributions

PW and XW performed most of experiments, and manuscript writing. CS supervised the present study and contributed manuscript writing. SL designed the experiment system. PW and SL offered the financial support and contributed manuscript writing. LL and JG did the experiments, analyzed the data. All authors read and approved the final manuscript.

Corresponding authors

Correspondence to Peng Wang or Shouxin Liu.

Ethics declarations

Ethics approval and consent to participate

Not applicable.

Consent for publication

Not applicable.

Competing interests

The authors declare that they have no competing interests.

Additional information

Publisherā€™s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Additional file 1: Table S1.

beta-lactamases in Paracoccus sp. Species. Table S2. penicillin acylases in Paracoccus sp. Species.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Wang, P., Shen, C., Wang, X. et al. Biodegradation of penicillin G from industrial bacteria residue by immobilized cells of Paracoccus sp. KDSPL-02 through continuous expanded bed adsorption bioreactor. J Biol Eng 14, 5 (2020). https://0-doi-org.brum.beds.ac.uk/10.1186/s13036-020-0229-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://0-doi-org.brum.beds.ac.uk/10.1186/s13036-020-0229-5

Keywords